Notices
Stock JK Tech Bulletin board forum regarding issues with OE (original equipment) components of the Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) such as factory suspension parts, engine, transmission, body parts, interior fixtures and the on-board computer.

Bump stop

Old Feb 23, 2014 | 07:16 PM
  #1  
Jeepstercanada's Avatar
Thread Starter
JK Enthusiast
 
Joined: Feb 2013
Posts: 461
Likes: 0
From: Winnipeg
Default Bump stop

After playing in deep snow today I noticed my passenger bump stop is against the axle and the driver side has about an inch or do clearance from axle, just wondering does this sound normal or did I break something. This is on a stock 13 rubicon with bumpers
Reply
Old Feb 23, 2014 | 07:40 PM
  #2  
AlexjeepVb's Avatar
JK Freak
 
Joined: Feb 2010
Posts: 689
Likes: 1
From: Virginia Beach, VA
Default

Your bumpstop should not be touching the axle. Not sure how that could happen unless your spring is way over compressed, or the bum stop post broke off of something like that. Take some pictures and post them up will be able to tell whats going on much better.
Reply
Old Feb 23, 2014 | 08:13 PM
  #3  
meep97's Avatar
JK Freak
 
Joined: May 2013
Posts: 772
Likes: 0
From: Cody, WY
Default

Originally Posted by AlexjeepVb
Your bumpstop should not be touching the axle. Not sure how that could happen unless your spring is way over compressed, or the bum stop post broke off of something like that. Take some pictures and post them up will be able to tell whats going on much better.
x2 with what he said. Take some pictures.
Reply
Old Feb 24, 2014 | 06:58 AM
  #4  
Jeepstercanada's Avatar
Thread Starter
JK Enthusiast
 
Joined: Feb 2013
Posts: 461
Likes: 0
From: Winnipeg
Default

Turns out spring wasn't seated correctly already been fixed under warranty
Reply



All times are GMT -8. The time now is 01:10 PM.