Notices
Stock JK Tech Bulletin board forum regarding issues with OE (original equipment) components of the Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) such as factory suspension parts, engine, transmission, body parts, interior fixtures and the on-board computer.

Jerking backwards on rough roads

Thread Tools
 
Old Jul 1, 2023 | 06:17 PM
  #1  
Inukshuk's Avatar
Thread Starter
JK Newbie
 
Joined: Jul 2023
Posts: 11
Likes: 0
From: Sainte-Anne-Des-Plaines
Question Jerking backwards on rough roads

Hi all
Just joined.
I have a 2016 JK 4 door and since a month ago it started jerking or a big sway backwards when driving 70 klm on a paved road that is very beat up at places. On any other road it doesn't do this. It is still stock with Bilstein shocks.
Reply
Old Jul 2, 2023 | 03:59 AM
  #2  
Sixty4x4's Avatar
Super Moderator
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2018
Posts: 2,726
Likes: 509
From: Calgary, AB, Canada
Default

Welcome. Sounds like Quebec roads not the Jeep.
Reply
Old Jul 2, 2023 | 06:54 AM
  #3  
Jay2013jk's Avatar
Super Moderator
Veteran: National Guard
10 Year Member
Liked
Community Favorite
 
Joined: Jan 2014
Posts: 2,109
Likes: 465
From: SE Pa. W. Chester County
Default

Welcome to JK Forum. Good friendly group with much knowledge.. Interesting issue, haven't heard of that previously. I'm not offering any guess on possibilities other than washboarding roadway bump spacing.
Reply
Old Jul 2, 2023 | 08:04 AM
  #4  
Inukshuk's Avatar
Thread Starter
JK Newbie
 
Joined: Jul 2023
Posts: 11
Likes: 0
From: Sainte-Anne-Des-Plaines
Default

Tks for responses. Yea Quebec roads for sure.
Reply
Old Jul 10, 2023 | 11:42 AM
  #5  
JFish'n's Avatar
JK Enthusiast
Liked
Loved
Community Favorite
 
Joined: Dec 2022
Posts: 176
Likes: 33
From: Utah
Default

Keep those suspension bolts tight.
They can become loose (Track bar etc) and do damage to the frame and axle slowly.
Once it's bad enough, then it's time for a skilled welder/fabricator to fix it.

My JK looks like it had loose bolts for a while.
The guy that fixed it said it was one of the worst track bar mounts he had ever seen due to the damage happening on the frame side and on the axle side.
Reply




All times are GMT -8. The time now is 12:26 PM.