I took a 12" chisel and wedged it behind the panel and lightly pecked a hammer on the end and the slope of the chisel helped push some of mine out.

 

My guess is about 90% of jks out there have that same dimple. welcome to the Club!!!

 

Mine are dented. I couldn't care less....

 

Heat it up with a hairdryer and then put some dry ice on it. It'll pull that dent right out.

 

DON'T TAP ON IT!!! You must PUSH it out easily with no area getting more pressure than another. If you tap it you will wind up with a group of high spots(tits) that will require grinding and filling to correct. Pay the dent doctor to remove it if it bothers you that much....

 

Oh Tinman i really wish i would have gotten your post sooner!! I tried to tap it out and now it's worse than it was before! MUCH WORSE! Does anybody know any good wrecking yards that i might be able to get that piece from?

Thanks in advance

(The more pissed off)

Rob

 

they should just put those dents in it form the factory

will the hair dryer and the dry ice really work? i have a dent about the same size on the hood that is not from the mirror i would like to get out. The mirror ding can stay.

 

 

I guess I should be laughing at myself ....according to other posts I guess the hair dryer thing works for some dents

 

heat it up with a heat gun then then put a cold bag of ice it might work it might have to be taken off t odo this from the inseide tho