Ok this past weekend i changed my release bearing and my pilot bearing. the clutch plate and the clutch disk looked fine. this noise that im getting is not from the pilot bearing or the release bearing. I am getting the noise when i am in 4th 5th and 6th gear. it gets super loud when im in 6th gear and as soon as i press the clutch down the noise goes away. someone suggested that it was the counter shaft bearing in the rear of the transmission but it's totally not coming from their. it sounds like its coming from the front of the transmission. im out of ideas. if this is something i can't diagnose im just going to have to bring it to the stealership and let them try and figure it out. it's just that it is my DD and i can't go without if for weeks at a time. if anyone has experienced the same kind of sound please let me know what you came up with for a fix. i was thinking of getting an aftermarket clutch plate and disk but i did not want to spend the money if i did not have too. any input would be greatly appreciated.

thank you

Mark

 

no one no one anyone

 

i never understand someone who installs a bumper that 500 other people have they get 30+ comments or someone who has done the 40th fender chop and everyone praises them like it's the first one done on the forum, i post something legit and no one answers Its starting to get a little annoying I joined this forum to get decent feedback from people with similar problems. and for all you people who are going to say do a search i already did. the search feature is slightly under par and never comes up with anything you search for.

 

Bump!!!!!!!!!!!!!!

 

Bump!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

BUMP until someone responds

 

check my thread out...

i had my input shaft and bearings replaced..

 

you have a link ?