Notices
JK CB & HAM Radios Bulletin board forum regarding all topics concerning CB and HAM radios, the installation of them in your Jeep JK Wrangler. This would include antenna mounts, wiring, tuning and usage.

nobody answers back.......

Thread Tools
 
Old Nov 13, 2012 | 05:08 PM
  #11  
GoRemote's Avatar
JK Enthusiast
 
Joined: Oct 2012
Posts: 158
Likes: 0
From: Tustin, CA
Default

Originally Posted by Rule18
... and a vote for the integral SWR meter... There ya go!
I agree. I have tested several CB's with built in SWR, and some have been 0.3 - 0.5 off compared to my meter (that is confirmed correct), but if you have a decent radio, they will most likely always give you a clue of how bad/good your SWR is...

The radio I am using now has a built in, and it works ok, not 100%. I can at least see if it goes up or down when making adjustments.

There is no need to buy one, if your SWR seems ok on all channels, and you can send/receive fine. Just borrow a meter later to confirm that your built in SWR meter is correct.
Reply
Old Nov 13, 2012 | 07:03 PM
  #12  
Jersey_Devil's Avatar
Thread Starter
JK Jedi
 
Joined: Jun 2012
Posts: 5,255
Likes: 11
From: Bellmawr, NJ
Default

Originally Posted by GoRemote

I agree. I have tested several CB's with built in SWR, and some have been 0.3 - 0.5 off compared to my meter (that is confirmed correct), but if you have a decent radio, they will most likely always give you a clue of how bad/good your SWR is...

The radio I am using now has a built in, and it works ok, not 100%. I can at least see if it goes up or down when making adjustments.

There is no need to buy one, if your SWR seems ok on all channels, and you can send/receive fine. Just borrow a meter later to confirm that your built in SWR meter is correct.
Sounds like a plan to me! Thanks
Reply




All times are GMT -8. The time now is 02:14 AM.