Notices
JK Electrical, Lighting & Sound Systems Bulletin board forum regarding topics such as stereo head units, CD players, MP3 players, speaker systems, amplifiers, hardmounted GPS devices, computers, headlight upgrades, fog lights, off-road lights, general wiring and anti-theft devices.

Radio question

Thread Tools
 
Old 02-08-2019, 05:43 AM
  #1  
JK Newbie
Thread Starter
 
JKUsport16's Avatar
 
Join Date: Jan 2019
Location: Gainesville Ga
Posts: 63
Received 10 Likes on 8 Posts
Default Radio question

Bought a 2016 JKU and it has an aftermarket radio it appears.
I haven't been able to find instructions anywhere. I can't figure
how to set my damn radio stations. I have to turn the dial each
time I turn it on. Yeah I know but it is irritating as hell.

Actual radio picture


Only thing I could find online and is not available now

Old 02-08-2019, 07:00 AM
  #2  
JK Enthusiast
 
Seizer's Avatar
 
Join Date: Jul 2017
Location: Parker, CO
Posts: 297
Received 25 Likes on 25 Posts
Default

You likely need to do more research. I am not sure that radio you have listed from Amazon is yours. One idea is pull your radio out and look at the tags for the unit. My search led me all over the place using the model number from Amazon.
Old 02-08-2019, 01:06 PM
  #3  
JK Newbie
Thread Starter
 
JKUsport16's Avatar
 
Join Date: Jan 2019
Location: Gainesville Ga
Posts: 63
Received 10 Likes on 8 Posts
Default

You can change the look of the face.
All the buttons down each side is the
same......thanks I will keep looking or
just turn the dial each time. Lol
Old 02-08-2019, 07:25 PM
  #4  
JK Jedi Master
FJOTM Winner
 
nthinuf's Avatar
 
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,465
Likes: 0
Received 162 Likes on 154 Posts
Default

Try contacting the support lines for the ebay/amazon sellers and see if they can't provide a link to the instruction manual. If not, they should at least be able to connect you with the company they buy them from.
Old 02-15-2019, 08:01 AM
  #5  
JK Enthusiast
 
KG6SLC's Avatar
 
Join Date: Aug 2011
Location: Was:Palmdale, CA Now: Cedar City UT
Posts: 286
Likes: 0
Received 2 Likes on 2 Posts
Default

Sometimes buttons react differently when pressed. For example simply pressing the button will invoke one action while pressing and HOLDING the same button will often take one into a setup menu. I would try pressing and holding for 3 or 4 seconds if you haven't tried that already.

Hope this helps

KG6SLC aka Eugene



Quick Reply: Radio question



All times are GMT -8. The time now is 02:28 AM.