I have had a busy weekend so far....

Upgraded to some BFG 35x12.5x15 KM2's....


Cut off the ugly crush cans and factory tow hooks.... replaced with Teraflex shackle mounts....

And made my own copy of an overhead CB mount....

 

Just finished my grill

 

there's no way this fits with the hardtop panels? and if it does how is it attached?

 

It fits just fine. It is 3/4 x 1 1/2 rectangular tube with some 1 1/2 flat stock welded on the ends of the tube. The flat stock is then drilled into the roll bar with self tapping metal screws. It is a copy of the Arizona Rocky Road mount. I made two of them for about $25. Simple as all get out. I will go take a few pictures with the hardtop on and the CB mounted up.

 

cool! I would've flipped the tube so the larger (main body) part faced downward for more clearance and a flusher mount with the stock roll bar.

 

I flipped it up for more head clearance...
The original design was down, but I gained 7/8" in height by flipping it. Look at the inside of your hardtop. Once inside the roll bars, it goes up 1 1/2 inches.

Here are some pics.. sorry for the quality its from my phone.

 

I traded mine in and came home with this one ^_^!! I call her... Therapy. Mods coming soon

 

Hardtop's off a while already, guess that's why mine's mounted above the mirror instead I only run it during the winter and take it off as soon as I can, can't stand it.

 

Technically not a mod (directly), but is for the rig!



Hardtop coming off next week.

 

Cut off the ugly crush cans and factory tow hooks.... replaced with Teraflex shackle mounts....

I found some small plastic inserts in the hardware aisle at Lowes to fill those holes in the bumper from the crush can covers when I cut mine off.