What was done to your JK this week?
JK Enthusiast
Joined: Nov 2012
Posts: 149
Likes: 1
From: Lafayette, LA
New tires, finally! I wanted to stay close to or at the stock size on the 18" Sahara rims but have a more aggressive tire that wouldn't have much effect on my gas mileage, as I am mostly on the road and occasionally need to get through some mud. After much agonizing research I went with the Hankook DynaPro ATm RF10 tires in P255/70r18 size. These tires are a good bit more aggressive than the Duelers and had great reviews. I love them so far! I find pictures don't do the most justice on showing the aggressiveness, but here they are anyway.
JK Newbie
Joined: Nov 2012
Posts: 91
Likes: 0
From: Miami, Florida
Haven't been on the forums for a couple of months. So here is what I've done to my JK
3.5 RC lift kit with Rancho RS5000 shocks
37' Nitto Terra Grapplers with 17' Fuel Octane rims. Waiting on a buyer for my tires. Getting mud grapplers next. I slip to much when I mud.
Smittybilt XRC Rear bumper with tire carrier.
Poison Spyder Brawler lite front bumper
Smittybilt XRC 8k winch
12' Cree Led light bar.
I took off my k&n air intake system and installed an AEV knockoff snorkel, works the same as the AEV one. Just have to make sure you seal everything right. Installed k&n drop intake filter with it.
Trimmed my fenders and eventfully painting them with Bedliner.
Smittybilt XRC Rock Sliders.
Installed today Quick disconnects.
My next investment is dropping a Rubicon Transfer case and getting adjustable control arms.
Hope everyone like my project!! dde2ccdf7b
3.5 RC lift kit with Rancho RS5000 shocks
37' Nitto Terra Grapplers with 17' Fuel Octane rims. Waiting on a buyer for my tires. Getting mud grapplers next. I slip to much when I mud.
Smittybilt XRC Rear bumper with tire carrier.
Poison Spyder Brawler lite front bumper
Smittybilt XRC 8k winch
12' Cree Led light bar.
I took off my k&n air intake system and installed an AEV knockoff snorkel, works the same as the AEV one. Just have to make sure you seal everything right. Installed k&n drop intake filter with it.
Trimmed my fenders and eventfully painting them with Bedliner.
Smittybilt XRC Rock Sliders.
Installed today Quick disconnects.
My next investment is dropping a Rubicon Transfer case and getting adjustable control arms.
Hope everyone like my project!! dde2ccdf7b
Last edited by djegolfpro; Sep 5, 2013 at 11:19 AM.
JK Enthusiast
Joined: Jul 2011
Posts: 219
Likes: 0
From: Leesburg, VA
JK Newbie
Joined: Nov 2010
Posts: 85
Likes: 0
From: Oviedo,Fl
Haven't been on the forums for a couple of months. So here is what I've done to my JK
3.5 RC lift kit with Rancho RS5000 shocks
37' Nitto Terra Grapplers with 17' Fuel Octane rims. Waiting on a buyer for my tires. Getting mud grapplers next. I slip to much when I mud.
Smittybilt XRC Rear bumper with tire carrier.
Poison Spyder Brawler lite front bumper
Smittybilt XRC 8k winch
12' Cree Led light bar.
I took off my k&n air intake system and installed an AEV knockoff snorkel, works the same as the AEV one. Just have to make sure you seal everything right. Installed k&n drop intake filter with it.
Trimmed my fenders and eventfully painting them with Bedliner.
Smittybilt XRC Rock Sliders.
Installed today Quick disconnects.
My next investment is dropping a Rubicon Transfer case and getting adjustable control arms.
Hope everyone like my project!! dde2ccdf7b
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=495186"/>
3.5 RC lift kit with Rancho RS5000 shocks
37' Nitto Terra Grapplers with 17' Fuel Octane rims. Waiting on a buyer for my tires. Getting mud grapplers next. I slip to much when I mud.
Smittybilt XRC Rear bumper with tire carrier.
Poison Spyder Brawler lite front bumper
Smittybilt XRC 8k winch
12' Cree Led light bar.
I took off my k&n air intake system and installed an AEV knockoff snorkel, works the same as the AEV one. Just have to make sure you seal everything right. Installed k&n drop intake filter with it.
Trimmed my fenders and eventfully painting them with Bedliner.
Smittybilt XRC Rock Sliders.
Installed today Quick disconnects.
My next investment is dropping a Rubicon Transfer case and getting adjustable control arms.
Hope everyone like my project!! dde2ccdf7b
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=495186"/>
