What was done to your JK this week?
JK Enthusiast
Joined: Dec 2007
Posts: 327
Likes: 0
From: Little Rock, Arkansas
drilled mirrors? Anybody???
Still waiting to hear some details on the drilled mirrors. What's the problem I need to be aware of? Where do I drill???
Last week, I took the rear cargo liner that was in my Pathfinder (lemon... long story) I trimmed it to the fit the size of the rear of the back seats, and to fit around the seatbelt anchors for the back seats. I then cut it so the seats would still fold flat without folding the rubber weirdly. I found some industrial strength velcro at Wal-Mart and attached it to the back of the rubber, and attached it to the carpet on the back of the seat. Now the rubber covers up that strange gap that's left when the seat is folded down so my dogs don't get their legs caught...kind like the guy who used the particle board. I'll show pics and dogs tomorrow.
Last week, I took the rear cargo liner that was in my Pathfinder (lemon... long story) I trimmed it to the fit the size of the rear of the back seats, and to fit around the seatbelt anchors for the back seats. I then cut it so the seats would still fold flat without folding the rubber weirdly. I found some industrial strength velcro at Wal-Mart and attached it to the back of the rubber, and attached it to the carpet on the back of the seat. Now the rubber covers up that strange gap that's left when the seat is folded down so my dogs don't get their legs caught...kind like the guy who used the particle board. I'll show pics and dogs tomorrow.
JK Enthusiast
Joined: Nov 2007
Posts: 103
Likes: 0
From: Greensboro NC
I installed new tweeters per the recommendation of a fellow PJK member. These things sound so incredible. I got to listen to them on the job all day today and couldn’t believe how good they sounded even out side the vehicle.
https://www.jk-forum.com/forums/show...light=Tweeters
Got another set for the rear speaker pods on the way.
https://www.jk-forum.com/forums/show...light=Tweeters
Got another set for the rear speaker pods on the way.
Last edited by Rescue Bean; Dec 5, 2007 at 08:47 PM.
JK Super Freak
Joined: Nov 2007
Posts: 1,037
Likes: 0
From: Colorado
This was my JK on Friday morning
This was taken a few hours later
An unexpected Christmas present of Crager Soft 8s with 265-75-16 Nitto Terra Grapplers. Also, adding tubular sidesteps were a must since my wife is 4'11".
They may not be 35s but I don't have rental car tires anymore! They are surprisingly great in the snow too.
This was taken a few hours later
An unexpected Christmas present of Crager Soft 8s with 265-75-16 Nitto Terra Grapplers. Also, adding tubular sidesteps were a must since my wife is 4'11".
They may not be 35s but I don't have rental car tires anymore! They are surprisingly great in the snow too.
JK Enthusiast
Joined: Sep 2007
Posts: 129
Likes: 0
From: Bastrop, Tx
Well all of this was not done this week, its been done over the course of the last couple weeks, but I guess i need to catch up:
1. Installed Teraflex BB, with additional 3/4" pucks.
2. Install PJ bumper I got for a good deal online used.
3. Jeep settled after bumper install so we installed the front unltd springs that came off my buddies unltd Rubicon and that raised it back up a little.
4. Bought a winch, installed it, solenod brackets didn't work well with the PJ bumper so my buddy fabbed me up a couple that would work better.
5. Mounter license plate to bumper so I wouldn't get tagged by local 5-0
6. Adjusted the headlights down so they would stop blinding the hell out of people.
7. Installed BDS rear track bar relocator and superlift adjustable front trackbar
Went on a little local run, but the Jeep forgot to go before we left home, so had to do his thing on the trail.
1. Installed Teraflex BB, with additional 3/4" pucks.
2. Install PJ bumper I got for a good deal online used.
3. Jeep settled after bumper install so we installed the front unltd springs that came off my buddies unltd Rubicon and that raised it back up a little.
4. Bought a winch, installed it, solenod brackets didn't work well with the PJ bumper so my buddy fabbed me up a couple that would work better.
5. Mounter license plate to bumper so I wouldn't get tagged by local 5-0
6. Adjusted the headlights down so they would stop blinding the hell out of people.
7. Installed BDS rear track bar relocator and superlift adjustable front trackbar
Went on a little local run, but the Jeep forgot to go before we left home, so had to do his thing on the trail.
Last edited by kerryp; Dec 9, 2007 at 06:48 AM.
