What was done to your JK this week?
#5011
#5014
Sponsoring Vendor
Off Road Evolution Rep
Off Road Evolution Rep
Join Date: Feb 2008
Location: Fullerton, Ca.
Posts: 3,068
Likes: 0
Received 0 Likes
on
0 Posts
Just finished adding the Daystar upper dash panel so I could mount my new Pioneer AVIC 500bt and added the Daystar hood latches that I got for my Bday!
Pics from my iphone.....
Pics from my iphone.....
#5016
JK Super Freak
Join Date: Nov 2008
Location: Central NJ
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
Finished Armoring Up... just in time to go to Rausch Creek for the East Coast Easter Jeep Safari!
Rock Hard Oil Skid, Rock Hard Transfer Case Skid & Rock Hard Evap Skid.
Stuff is pretty beefy but a bit feisty to get on/aligned. Thank goodness for 2 jacks to lift those metal beasties up.
Rock Hard Oil Skid, Rock Hard Transfer Case Skid & Rock Hard Evap Skid.
Stuff is pretty beefy but a bit feisty to get on/aligned. Thank goodness for 2 jacks to lift those metal beasties up.
#5017
I dont have pics yet but I wired up my offroad lights and mounted two front recovery points. With my tube bumpers I was a little puzzled as to how to mount recovery points up front. I found some very heavy duty 1.50" square tubing and tractor drawbar grab hooks. The Tractor drawbar hooks are rated at 10k. Drilled holes into the frame and bolted the tubing into the frame with grade 8 bolts. Then attached the drawbar hook to the tubing. I then added some welds to the frame and tubing just for added strenght and was done. It seems very sturdy and should work when I need to give or receive a pull.
#5018
Smits
Yell if you need more, but I am 200% pleased....we got way more then what we paid for them.
#5019
JK Enthusiast
Join Date: Sep 2008
Location: Boston, MA
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Getting ready
Getting ready to put the newly powder coated stock wheels on the 09 Rubi. I had to paint the lugs and and hub inserts to make sure everything matches.
Sanded with 400 grit sandpaper
Two LIGHT coats of Duplicolor flat black primer
Two LIGHT coats of Duplicolor flat black automotive paint
Two LIGHT coats of Duplicolor clear coat and we get the finished product
I'll post them with the wheels on tomorrow.
Sanded with 400 grit sandpaper
Two LIGHT coats of Duplicolor flat black primer
Two LIGHT coats of Duplicolor flat black automotive paint
Two LIGHT coats of Duplicolor clear coat and we get the finished product
I'll post them with the wheels on tomorrow.
Last edited by kafka1983; 04-03-2009 at 07:35 PM.