Got my Jeeperman
#21
JK Freak
Join Date: Dec 2006
Location: Westfield, MA
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
at least you didn't get an answering service from India or Pakistan...... , like most major companies are doing lately......
#22
JK Super Freak
Thread Starter
Join Date: Jan 2007
Location: Tarzana, CA
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
#24
Eternal ***erator
That does look nice!
Is there any way to possibly relocate the spare further down on the carrier?
Might move it down just enough to make the rear window semi-functional for viewing purposes?
Is there any way to possibly relocate the spare further down on the carrier?
Might move it down just enough to make the rear window semi-functional for viewing purposes?
Last edited by HappyCurmudgeon; 03-02-2007 at 06:36 AM.
#25
Ya I am glad I bought the Jeeperman Rear. (NOW IF I COULD JUST GET IT) by far the best looking one out there and the quality is far beyond what anyone else has! What are doing for a front?
#26
JK Super Freak
Thread Starter
Join Date: Jan 2007
Location: Tarzana, CA
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
#27
JK Super Freak
Thread Starter
Join Date: Jan 2007
Location: Tarzana, CA
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
That should be here in a week or so.
#29
JK Super Freak
Thread Starter
Join Date: Jan 2007
Location: Tarzana, CA
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
Rear Jeeperman Full Set up (Pictures)
Here are some more shots of the Rear Bumper w/ Jerry Cans & Rack. It took awhile the first time just to get centered level/ marked for future reinstall.
But when it's finished it's worth it.
Here's a note if you use the 1" LED. I drilled through the Bumper by the Hinge on the vertical wall and fed the wire through. Then there's a hole that will get you to the Right tail light. Remove the tail light and use Quick Connect connectors to tap into the brake light power for the LED.
Use the black and the yellow/ white wires, these are the brake light wires. This is very easy access and quick. See the last picture for some detail of the wiring.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
But when it's finished it's worth it.
Here's a note if you use the 1" LED. I drilled through the Bumper by the Hinge on the vertical wall and fed the wire through. Then there's a hole that will get you to the Right tail light. Remove the tail light and use Quick Connect connectors to tap into the brake light power for the LED.
Use the black and the yellow/ white wires, these are the brake light wires. This is very easy access and quick. See the last picture for some detail of the wiring.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]