OK bs
very true !!
JK Jedi
Joined: Apr 2008
Posts: 4,273
Likes: 0
From: Broken Arrow, Oklahoma
Originally Posted by Coondog33
Guys n Gals..should I sleeve my axle when I put the gussets on...was just gonna do the Cs..now just wondering if I should do it all at once...
JK Jedi
Joined: Apr 2008
Posts: 4,273
Likes: 0
From: Broken Arrow, Oklahoma
Originally Posted by bigcjeep
I think its safe to say after 2 months old there are only a couple of issues I have found with my 2011 Rubi.. for one the spot in hardtop where the factory rear defrost electric comes out has worn a notch in the hartop itself. The cable should be longer to allow more slack instead of being very tight.. I have even tried to pull out extra, but no luck.
Also the drivers side B pillar bolt hole for the hardtop has been threaded crooked.. When its tightened down and snug it seems flush, but I know going into it, it is at an angle. I noticed this the first time I pulled the top off and as the bolt came out it was coorked.
Havnt talked to the stealership about either of these yet, but its about time for an oil change so I might need to talk to them...
Also the drivers side B pillar bolt hole for the hardtop has been threaded crooked.. When its tightened down and snug it seems flush, but I know going into it, it is at an angle. I noticed this the first time I pulled the top off and as the bolt came out it was coorked.
Havnt talked to the stealership about either of these yet, but its about time for an oil change so I might need to talk to them...
JK Freak
Joined: Dec 2010
Posts: 652
Likes: 0
From: T-Town, OK
true that.. there both stupid mistakes that shouldnt be there.. must of been made on a friday.. haha Then again I have heard some serious problems from factory so I cant complain much.. haha
JK Freak
Joined: Dec 2010
Posts: 652
Likes: 0
From: T-Town, OK
I think im going to start tinkering with that bumper I got from HolyJoe mainly the plastic part.. I figure its going to take some time to get that plastic the way I want it to look like.. depending on how far I get I will update with some pics..
JK Junkie
Joined: Sep 2010
Posts: 2,215
Likes: 0
From: Scottsdale, AZ
Oh my gosh...
catching up real quick...shouldn't you guys be working?! 
It will only take me about 17 hours per mapquest who didn't account for 35's
That's my birthday 
and I will be in Mexico 
I know the guys here use the jigsaw method and line them with a door trim or something so it looks nice & finished
takes about an hour so I'm told.
I just woke up
later than normal I might add and it's 78 which means it'll be warmer on my way to work....but I won't post pics. Coondog can't handle it
I had my girl about 5 months before I was able to get tires on her. It killed me. I totally know how you feel!!
I think...
...they will probably just drag on the rocks when you're wheelin' 
whew! caught up! Ok I need to take my Or-Fab sliders out of this freaking huge box so I can take them tomorrow and install them, pack a lunch, nap another hour, get ready for work....Did I mention it's my FRIDAY Catch ya all this eve!
catching up real quick...shouldn't you guys be working?! It will only take me about 17 hours per mapquest who didn't account for 35's
and I will be in Mexico I know the guys here use the jigsaw method and line them with a door trim or something so it looks nice & finished
takes about an hour so I'm told.I just woke up
later than normal I might add and it's 78 which means it'll be warmer on my way to work....but I won't post pics. Coondog can't handle itI think...
...they will probably just drag on the rocks when you're wheelin' whew! caught up! Ok I need to take my Or-Fab sliders out of this freaking huge box so I can take them tomorrow and install them, pack a lunch, nap another hour, get ready for work....Did I mention it's my FRIDAY
Catch ya all this eve!
JK Freak
Joined: Sep 2010
Posts: 529
Likes: 0
From: Edmond, Oklahoma
well im about to pull the trigger and call Dave and buy the lift/trackbar/ORO light
