38x13x17 geolandar on stock rims
Thread Starter
JK Super Freak
Joined: Oct 2010
Posts: 1,240
Likes: 0
From: rochester,mn
38x13x17 geolandar on stock rims
Anyone mounted these tires on stock Rubi rims?
I currently have a set of 12.5's mounted
But was wondering if 13.5 wide is pushing it!!
the section width of my current states 12.5 and the 13.5 ones I'm looking at state section width of only 13 so thats 1/2 inch different
I currently have a set of 12.5's mounted
But was wondering if 13.5 wide is pushing it!!
the section width of my current states 12.5 and the 13.5 ones I'm looking at state section width of only 13 so thats 1/2 inch different
Last edited by snopro269; Oct 11, 2011 at 06:17 AM.
Thread Starter
JK Super Freak
Joined: Oct 2010
Posts: 1,240
Likes: 0
From: rochester,mn
Yeah Its nit a daily driver and its parked in the winter
I'm just wondering if anyone has installed these tires on stock rims
Line I said according to specs mine is 12.5 the other is 13.0
I'm just wondering if anyone has installed these tires on stock rims
Line I said according to specs mine is 12.5 the other is 13.0
JK Enthusiast
Joined: Nov 2010
Posts: 464
Likes: 0
From: north dakota
Originally Posted by snopro269
yeah i just hope the tire shop will be willing to mount it on the rim
JK Super Freak
Joined: Jun 2008
Posts: 1,116
Likes: 3
From: Calgary, Alberta, Canada
I'm running 12.5" wide tires (two sets) on the stock rims. In both cases, the rims are just slightly narrower than what the tire manufacturer recommends. No problems so far. I kinda think that running a 7" rim with a 12.5" wide tire helps the tire stay on the rim when I'm aired down wheeling. I run 9 psi when off road, and have not had issues with blowing beads.
