Hi, I've been working on first phase mod plan for my 2009 2dr X. I'm stuck:

1) I am going to get the 2.5 EVO enforcer system (this is a 3.5" lift)
2) I want to use my 17" x 7.5" stock aluminum wheels
3) I was planning on using the Nitto Trail Grapplers - this is the one i had thought might work
35x12.50R17LT E 121Q
4) however, I think this tire might be too wide even with spidertrax spacers
5) does anyone know which tire might work?
6) any thoughts or comments?

Thanks a lot and appreciate it

D

 

you can get them to work with wheel spacers but you will still have some rubbing when stuffed and at a full turn.

 

so then it would be best to buy new wheels with 4.5" backspacing? I was hoping to use the stock ones. bummer...

 

i wonder if i should stick with stock 17's or bump up to 18's with my 3.5" lift.

i wonder if this would be better and look nicer too???

 

You can go with spacers or if your budget allows it new wheels it's all up to you...

 

I cant remember who... but someone makes a 2" wheel spacer.

 

actually what i was wondering is if i should buy 17 inch wheels or go with 18 inch wheels - ive already accepted that i wont be using stock 17's

getting psyched!

 

17" tires will be cheaper.