Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Full Traction 3" + 35's - JK Rubi Issues!

Thread Tools
 
Old Apr 6, 2007 | 02:11 PM
  #21  
Rubimon's Avatar
JK Jedi
 
Joined: Sep 2006
Posts: 5,567
Likes: 1
From: So. Cal.
Default

Originally Posted by GOCACHN
The Ft lower fronts are 23 inches,the rears are 21 inches.
Thank you, How about the uppers?
Reply
Old Apr 6, 2007 | 04:58 PM
  #22  
GOCACHN's Avatar
JK Enthusiast
 
Joined: Jan 2007
Posts: 121
Likes: 0
From: Bullhead City AZ.
Default

Originally Posted by Rubimon
Thank you, How about the uppers?
I have the Premium kit, it uses the stock uppers and has new fixed length lowers.
Reply
Old Apr 6, 2007 | 06:25 PM
  #23  
Rubimon's Avatar
JK Jedi
 
Joined: Sep 2006
Posts: 5,567
Likes: 1
From: So. Cal.
Default

Originally Posted by GOCACHN
I have the Premium kit, it uses the stock uppers and has new fixed length lowers.
My Bad, the amount of times I looked at that kit, I never realized that. Well I can take the relationship of the stock uppers to the lengths you gave me and kind of keep the ratios in check. Thanks!
Reply
Old Apr 6, 2007 | 07:45 PM
  #24  
Jolly Roger's Avatar
JK Newbie
 
Joined: Jan 2007
Posts: 77
Likes: 0
Default

Originally Posted by Rubimon
My Bad, the amount of times I looked at that kit, I never realized that. Well I can take the relationship of the stock uppers to the lengths you gave me and kind of keep the ratios in check. Thanks!

Are you having that much of a problem dialing it in???
Reply
Old Apr 6, 2007 | 08:14 PM
  #25  
Rubimon's Avatar
JK Jedi
 
Joined: Sep 2006
Posts: 5,567
Likes: 1
From: So. Cal.
Default

No, all I have are the front upper control arms. I am waiting for the rest of them to ship. I will do it the proper way, with springs and shocks off, making sure my bump stops hit dead center. I just like to have some numbers to double check with while I'm doing it.
Reply
Old Apr 6, 2007 | 09:05 PM
  #26  
Jolly Roger's Avatar
JK Newbie
 
Joined: Jan 2007
Posts: 77
Likes: 0
Default

Originally Posted by Rubimon
No, all I have are the front upper control arms. I am waiting for the rest of them to ship. I will do it the proper way, with springs and shocks off, making sure my bump stops hit dead center. I just like to have some numbers to double check with while I'm doing it.
I had the same probelm with FT. First they could not ship, then the shipped to the wrong address, then the wanted to ship an incomplete kit.

Good luck. I know FT is a big part of this site. But they have pissed me off to the point that I do not care.
Reply
Old Apr 6, 2007 | 11:25 PM
  #27  
Rubimon's Avatar
JK Jedi
 
Joined: Sep 2006
Posts: 5,567
Likes: 1
From: So. Cal.
Default

Originally Posted by Jolly Roger
I had the same probelm with FT. First they could not ship, then the shipped to the wrong address, then the wanted to ship an incomplete kit.

Good luck. I know FT is a big part of this site. But they have pissed me off to the point that I do not care.
Actually, I started with the Economy lift. Then I ordered the track bar and front upper control arms. Once I decided to do the front lowers, I said what the heck and ordered the rear uppers and lowers also. I figured I might as well have the ultimate kit and do it right. I ordered them piece by piece as they became available and as I could afford to do them. I do agree though, I would just prefer they give a date rather than next week, next week, etc.
Reply




All times are GMT -8. The time now is 02:04 PM.