JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Need help with PSC Hydro and RIPP Gen2

Thread Tools
 
Old Feb 20, 2011 | 01:02 AM
Share
  #11  
JKProfessor's Avatar
JKProfessor
Thread Starter
JK Freak
 
Joined: Dec 2006
Posts: 508
Likes: 0
From: Valley Center, Ca
Default
Originally Posted by GCM 2
JKProfessor, I would love to see lots of photos posted here in your thread once you have the whole RIPP/PSC set up finished. I think the RIPP S/C is becoming the route I want to take before I decide if taking the $25k(plus) Hemi VVT plunge is an option.
Will do!
Reply
0
Old Feb 20, 2011 | 01:03 AM
Share
  #12  
JKProfessor's Avatar
JKProfessor
Thread Starter
JK Freak
 
Joined: Dec 2006
Posts: 508
Likes: 0
From: Valley Center, Ca
Default
Originally Posted by RIPPMODS
Always room for improvement - thanks for the notes we look forward to seeing them.

RIPPTECH
Will do!
Reply
0
Old Feb 20, 2011 | 10:53 AM
Share
  #13  
JKProfessor's Avatar
JKProfessor
Thread Starter
JK Freak
 
Joined: Dec 2006
Posts: 508
Likes: 0
From: Valley Center, Ca
Default
Hey Ripp,

Question for you......
Any issue with running the MPG spark plug wires by Granetelli with the Supercharger? Good thing? Bad thing? Won't matter?
h ttp://www.4wd.com/productdetails.aspx?jeep-sid=0&plID=607&partID=42220

Thanks
Reply
0
Old Feb 25, 2011 | 01:37 PM
Share
  #14  
Dmerk524
JK Enthusiast
 
Joined: Nov 2007
Posts: 291
Likes: 0
From: Brooklyn, NY
Default
Hey guys I just wanted to let you know I adressed this issue and spacing the RIPP is not the best way to handle the situation and will in fact put stress on the other pulleys. I detailed what I did bellow.

https://www.jk-forum.com/forums/show...ARB-Compressor
Reply
0
Old Feb 27, 2011 | 11:02 AM
Share
  #15  
JKProfessor's Avatar
JKProfessor
Thread Starter
JK Freak
 
Joined: Dec 2006
Posts: 508
Likes: 0
From: Valley Center, Ca
Default
Originally Posted by Dmerk524
Hey guys I just wanted to let you know I adressed this issue and spacing the RIPP is not the best way to handle the situation and will in fact put stress on the other pulleys. I detailed what I did bellow.

https://www.jk-forum.com/forums/show...ARB-Compressor

Thanks Dmerk, I am going to check it out again today. I am still having some trouble figuring out exactly how you did this, but I;ll stare at it a bit today and I am sure I will see it.

I'd sure like to hear what RIPP has to say about this and the previous spacer location wearing bearings as well.
Reply
0
Back to Subforum
Modified JK Tech
View Next Unread
Which is lighter?




Advanced Search

All times are GMT -8. The time now is 07:37 PM.