JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion
Page 3 of 6
1
2
3
4
5
Last »
Show 40 post(s) from this thread on one page

JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion (https://www.jk-forum.com/forums/)
-   Modified JK Tech (https://www.jk-forum.com/forums/modified-jk-tech-2/)
-   -   Rust, Rust & More Rust!! (https://www.jk-forum.com/forums/modified-jk-tech-2/rust-rust-more-rust-320761/)

catahoula 05-19-2015 03:45 PM
Por-15 awesome product! Requires additional products...marine clean and metal ready. It is not UV resistant and will chaulk over time and is used in the automotive restoration industry for things like chassis, frames,... I topcoated with a poly urethane for substrates that were not under the chassis.

http://qr.absolutecoatings.com/QR-as...escription.pdf

jaxhammer 05-19-2015 04:58 PM
Originally Posted by jeepmojo (Post 4101284)
applied ? hmmm not bad
Yes. This is 2 hours after application. Have to let it cure 48 hours before I can paint. It continues to get more black.:)

MRTrelease 05-19-2015 05:09 PM
Originally Posted by jaxhammer (Post 4101251)
Here is a pic of what I started using: <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=611477"/> Look at the transformation after only 2 hours: <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=611478"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=611479"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=611480"/> Appears to be turning black. Once this happens, is it really a matter of taking a can and going to town? Should I not care what the paint hits? I know.......dumb question but I have to ask it. New to Jeep and new to working on my own stuff!?!?!?!?! LOL!
Wow! How did you get your jeep upside down to get those pictures? :)

jaxhammer 05-19-2015 05:13 PM
Originally Posted by MRTrelease (Post 4101325)
Wow! How did you get your jeep upside down to get those pictures? :)
LMAO!! Flick of the wrist!:cool:

mwtrent 05-19-2015 05:15 PM
I just use roll bar and frame paint that comes in a rattle can after treating rust.

mwtrent 05-19-2015 05:16 PM
Originally Posted by mwtrent (Post 4101330)
I just use roll bar and frame paint that comes in a rattle can after treating rust.
Manufacturer is VHT

jaxhammer 05-19-2015 05:16 PM
Originally Posted by jaxhammer (Post 4101251)
Here is a pic of what I started using: Attachment 611477

Look at the transformation after only 2 hours:
Attachment 611478Attachment 611479Attachment 611480

Appears to be turning black. Once this happens, is it really a matter of taking a can and going to town? Should I not care what the paint hits? I know.......dumb question but I have to ask it. New to Jeep and new to working on my own stuff!?!?!?!?! LOL!
Same question as above. Also, if you have cool recommendations on how to paint the differential another color/design, that would be cool. Any ideas?

jaxhammer 05-19-2015 05:41 PM
Originally Posted by mwtrent (Post 4101332)
Manufacturer is VHT

Do you just spray until the cows come home? Coat everything and anything?

mwtrent 05-20-2015 02:00 AM
Originally Posted by jaxhammer (Post 4101345)
Do you just spray until the cows come home? Coat everything and anything?
For the most part if it came black from the factory I spray it. Anything more would look tacky. Again, I treat any signs of rust first with reformer. I also did the frame internal with Eastwood.

jeepmojo 05-22-2015 04:58 PM
results ??????
 
lets see what youve done so far:photo: pita huh? scraping and chizzlin the rust layers dont feel bad mines a 12 prob worse than yours :crazyeyes:


All times are GMT -8. The time now is 05:46 AM.
Page 3 of 6
1
2
3
4
5
Last »
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands