I did indeed check their website but they don't have that daylight running lights disable feature. Reason I want it is because Im running HIDs and its bad for the ballasts and they buzz in low power state day lights, normal beams theyre fine. I know the AEV Procal module has that feature but they lack the tuning options geez

 

Grouch which tune are you running?

 

Reg/Tow: 11.5 HP, 15.3 TQ Currently.

But on the next fill up im going to get 91 and run the Prem/Speed: 15+ HP, 20+ TQ.

 

Daytime running lights are mandatory in Canada, not sure abour the U.S.

 

In the US specifically in California it's only required when posted. Mostly I've seen requirements for daytime lights in 2 lane highways with passing zones.

 

In talks with edge trying to find out what they are doing.
Here's their reply;

Jeremy,

We are currently working with our some of our business partners to
develop a really cool product for the JK Wranglers. When it comes out it
will most likely be similar to the Evolution CTS that we currently sell.


Best regards,

Mark Hayward
Inside Sales
Edge Products

 

just got it today and installed right after. Install was a breeze and didnt take more than an hour to download. i installed it on regular/tow mode.

here's pics of the install

 

Power wire to fusebox


Ran power to fuse so it turns on/off with the key


with window mount. will probably get a different mounting option later.




drove it from my house to town which is about 15 miles and noticed some gains in power. not alot but it was noticeable. Now getting about 14 mpg in my backwoods area and i normally got 11-12 mpg.

 

Ordered mine. Thanks for all the info guys, and thanks for the pics Randonizer.

 

It's so funny that the company H & S sells their module to Bullydog and they take all the credit!!