sway disconnect choice

Reply Subscribe

Thread Tools

Feb 12, 2011 | 03:05 AM

#11

Rhino64

JK Freak

Joined: Jun 2008

Posts: 812

Likes: 1

From: Great state of Arizona

Quote:

Originally Posted by drivingfool

I'm getting into an AEV 3.5" premium on an 09 unlimited sahara, with ORE axle C's and 35s and I have to pick a sway disconnect. I'm leaning towards the Teraflex because it seems pretty simple, but they have 2 sizes to choose from, 0-3" and 4-6" so which is the right one for the AEV 3.5"?
All opinions welcome, thanks.

I'd reconsider the TeraFlex the bushing in mine only lasted about 5K miles. I replaced them with JKS which I like because you can get your sway-bar at the correct level. Seems on the TF the Zerk's bottom out in the area where you grease them. Yeah I know you can put small washers under them so you can grease them but why should you have to modify a new item. Unless they have corrected that issue I would stay clear of them. Just my 2 cents.

Feb 12, 2011 | 04:43 AM

#12

drivingfool

Thread Starter

JK Enthusiast

Joined: Jan 2011

Posts: 217

Likes: 0

From: Colorado Springs

Quote:

Originally Posted by stlfan06

Give JKS a look. Instead of undoing one side and worrying about securing it, the JKS ones disconnect on both ends, so you can take the whole disconnect off. Plus, they work for a larger variety of lift heights (2"-6"), I believe.

Hmmmmm, good info,thanks