N8Kern

I see it being advertised at the top of the JK Forum here in a banner, but I cannot find it on thier site?! Any info as to what it is and how much it is?!

nate

MoombaMR20

I am very interested in this lift as well; I definitely want a long arm kit for the flex and a 6" would be nice so I wouldn't have to use a body lift. my 37's are just waiting in the garage for a kit to come out that i like that doesn't cost a fortune. RE 4.5" is nice but I'm a higher lift kind of guy, want to see the 6" with 37's; anyone have any pics?

coltc2000

no pics but was told the 6 in would run about 1700.00
info from terra flex parts dept.

RotorHead

It would be nice if they offered it at that price, but I wouldn't get your hopes up. Their 4" lift with adjustable control arms and both track bars will run you about $2200 at Quadratec. I got a little better deal from David at Northridge (Thanks David). I can't see how a 6" long arm kit would be less.

N8Kern

Would like to hear back from Tera Flex. A 6 inch would be cool. $$$???


Nate

JackMac4

Full traction has a 6" long arm that isn't on their site yet either..i've emailed them for price and availability but no response yet. I think a lot of these large lifts are about to flood the market...which is a good thing for us.

RubberDucky

Talked to Teraflex, they have a November window for the 6" LA.

Seth.

jaymtz78

This is the reply I got back from them...

HI JAY, WE ARE IN THE FINAL TESTING STAGES EVERYTHING IS GOING WELL
WITH THE
R&D. OUR PROJECTED DATE FOR RELEASE IS LATE NOVEMBER 07, THE FIRST OF
NEXT
YEAR MIGHT BE MORE REALISTIC. WE ARE USING THE STOCK DRIVE SHAFTS
RIGHT NOW
, WITH THE 6'' LIFT FUTURE TESTING WILL TELL US IF THEY HOLD UP. I
PERSONALLY WOULD UPGRADE THE DRIVE SHAFTS , THE OEM STYLE HAS THE SLIP
IN
THE SHAFT TUBING AND USES A TULIP STYLE CV ON BOTH ENDS . THIS DESIGN
DOSN'T
ACCEPT MUCH ANGLE , AND IS WEAKER THAN A CONVENTIONAL CV JOINT. WE WILL
HAVE
DRIVE SHAFTS AVAILABLE AT THAT TIME ALSO, ALONG WITH THE UBOLT STYLE
OUTPUT
YOKES. GOING WITH THE KIT AND SHAFTS WILL GIVE YOU THE BEST RELIABILITY
AND
PIECE OF MIND . WE APPRICIATE YOUR PATIENCE , THE WAIT WILL BE WORTH
YOUR
WHILE. THANKS FOR YOUR INTEREST IN TERAFLEX PRODUCTS, DOUG HENDERSON
CUSTOMER SERVICE.

JKevbo

I just had the 4" Teraflex installed with new control arms etc. I am running 37's and have no rubbing with articulation or turning. I have attached a picutre for you reference

rblprd

Skyjacker is showing a 6" lift on their site for the JKs the Part Number is JK60LAK-SX

Description
Long Arm; Suspension Lift Kit; 6-7 in. Lift; Incl. Front/Rear Coil Springs; Requires New Front Driveshaft