What set up are you running for Axial Jeep
#1
JK Super Freak
Thread Starter
Join Date: May 2011
Location: Keystone Heights
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
What set up are you running for Axial Jeep
Getting the Axial Jeep kit and wanted to know what motor and ESC you guys are running and how they perform.
#2
JK Freak
Tekin fxr and a 35 t motor. Preferably a holmes hobbies motor.
Have burned up 3 castles in the last few years.
Have never had a problem with the Tekins. Have some that are over 6 years old and stil working great.
Have burned up 3 castles in the last few years.
Have never had a problem with the Tekins. Have some that are over 6 years old and stil working great.
#3
Holmes motors are the way to go and I agree with a 35 turn.
#5
JK Super Freak
Thread Starter
Join Date: May 2011
Location: Keystone Heights
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
Depends on what you will be doing a 35T will be a good all around motor for crawling and speed. A 55 turn will be great for crawling but will run out of rpms quickly so speed will be limited. You'll have tons of torque though.
#7
JK Freak
Also depends on what battery setup you run. A 55 on 3s would be close to a 35 on 2s in regards to wheelspeed.
Torque would also come into factor.
The torque masters from holmes hobbies are great motors.
Trending Topics
#8
JK Super Freak
Join Date: Mar 2010
Location: San Marcos, CA
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
I'm probably gonna get the following:
ESC
Castle Creations Mamba Max Pro 1/10 Brushless ESC with SMARTSENSE
OR
Tekin RS Pro Sensored Brushless ESC
Motor
Tekin ROC 412 4-Pole Sensored Brushless Rock Crawler Motor (3100kV)
OR
Tekin FXR 35T
decisions, decisions
ESC
Castle Creations Mamba Max Pro 1/10 Brushless ESC with SMARTSENSE
OR
Tekin RS Pro Sensored Brushless ESC
Motor
Tekin ROC 412 4-Pole Sensored Brushless Rock Crawler Motor (3100kV)
OR
Tekin FXR 35T
decisions, decisions
#10