So What Was Done to Your Jeep This Week?
JK Jedi
Joined: Oct 2010
Posts: 5,192
Likes: 3
From: REDONDO BEACH, CA
Former Member
Joined: Aug 2012
Posts: 1,748
Likes: 1
From: Oceanside - san diego, Ca.
Headed to johnson valley Saturday (fingers crossed) to run clawhammer and chocolate thunder so to morrow I'm making the tubes and welding them to the rear corner guards.
Haven't decided if rivets are getting painted yet (probably).
The difference between tube and skinz is HUGE. you can actually feel the heater and less road noise as well as a lot less wind at 80mph...
Haven't decided if rivets are getting painted yet (probably).
The difference between tube and skinz is HUGE. you can actually feel the heater and less road noise as well as a lot less wind at 80mph...
JK Freak
Joined: Jan 2011
Posts: 761
Likes: 0
From: Poway, California
I think that's awesome!
And I like what you did with the rotopax mounts. I may need to do something similar to my LoD gen2... also I need to drill new holes to mount it much higher.
EDIT: can you post a pic of the inside of the carrier so I can see where your mount points are?
And I like what you did with the rotopax mounts. I may need to do something similar to my LoD gen2... also I need to drill new holes to mount it much higher.
EDIT: can you post a pic of the inside of the carrier so I can see where your mount points are?
Also added 3 LED's to light up my license plate
Last edited by 69mach1; Feb 17, 2013 at 08:39 PM.
JK Freak
Joined: Jan 2011
Posts: 761
Likes: 0
From: Poway, California
I added a remote control to my compressor mounted on the spare tire carrier
Also added a 3/4" spacer to the right front coil spring, adjusted the sway links and whala!!! No more JK lean The lean was 1" towards the passenger side, half was the sway bar links missadjusted, a 3/4" spacer took care of the rest 
And I got word my new JCR stubby prerun bumper has shipped
It was a good day
Also added a 3/4" spacer to the right front coil spring, adjusted the sway links and whala!!! No more JK lean
The lean was 1" towards the passenger side, half was the sway bar links missadjusted, a 3/4" spacer took care of the rest And I got word my new JCR stubby prerun bumper has shipped
It was a good day
JK Super Freak
Joined: Apr 2010
Posts: 1,652
Likes: 2
From: San Marcos, CA
I added a remote control to my compressor mounted on the spare tire carrier
Also added a 3/4" spacer to the right front coil spring, adjusted the sway links and whala!!! No more JK lean The lean was 1" towards the passenger side, half was the sway bar links missadjusted, a 3/4" spacer took care of the rest
And I got word my new JCR stubby prerun bumper has shipped
It was a good day
Also added a 3/4" spacer to the right front coil spring, adjusted the sway links and whala!!! No more JK lean
The lean was 1" towards the passenger side, half was the sway bar links missadjusted, a 3/4" spacer took care of the rest And I got word my new JCR stubby prerun bumper has shipped
It was a good day
