So What Was Done to Your Jeep This Week?
JK Jedi
Joined: Oct 2010
Posts: 5,192
Likes: 3
From: REDONDO BEACH, CA
Mounted & wired ARB air compressor w/ EVO bracket.
If you're just going to use it for airing up tires, you can splice the red/black wires from the harness and connect direct to your sPod. You do not need to hook up the other wires (from the harness) to the pressure switch terminal, but you will still have to mount the pressure switch to the 3-way splitter (or cap it off).
EDIT: I kept the 40a in-line fuse on the (+) wire when wiring to the sPod, just to be safe.
If you're just going to use it for airing up tires, you can splice the red/black wires from the harness and connect direct to your sPod. You do not need to hook up the other wires (from the harness) to the pressure switch terminal, but you will still have to mount the pressure switch to the 3-way splitter (or cap it off).
EDIT: I kept the 40a in-line fuse on the (+) wire when wiring to the sPod, just to be safe.
Last edited by TURTLECON; Aug 18, 2013 at 05:55 PM.
Former Member
Joined: Aug 2012
Posts: 1,748
Likes: 1
From: Oceanside - san diego, Ca.
JK Enthusiast
Joined: Jun 2013
Posts: 112
Likes: 0
From: San Juan Capistrano, CA
Have a good night!! An thanks again!
JK Jedi
Joined: Feb 2012
Posts: 6,546
Likes: 2
From: Panorama city,Ca
