INTRODUCING Trail-Flame 7" LED Headlamps with DRL
JK Enthusiast
Joined: Sep 2014
Posts: 146
Likes: 0
From: Brooklyn, NY
What kind of warranty are you offering? Very interested in this product
2015 JKUR, Anvil, 3.5" AEV, 35x12.5R17 Nitto Trail Grapplers, Bestop Trektop Pro, TruckLites, Poison Spyder Stubby, Smittybilt 12.5 XRC, Red Prolink, EVO rear bumper cover, Banks CAI & Cat Back,
2015 JKUR, Anvil, 3.5" AEV, 35x12.5R17 Nitto Trail Grapplers, Bestop Trektop Pro, TruckLites, Poison Spyder Stubby, Smittybilt 12.5 XRC, Red Prolink, EVO rear bumper cover, Banks CAI & Cat Back,
JK Enthusiast
Joined: Sep 2014
Posts: 146
Likes: 0
From: Brooklyn, NY
Just answered my own question lol. I'm gonna wait for the first forum member to get his hands on a set
2015 JKUR, Anvil, 3.5" AEV, 35x12.5R17 Nitto Trail Grapplers, Bestop Trektop Pro, TruckLites, Poison Spyder Stubby, Smittybilt 12.5 XRC, Red Prolink, EVO rear bumper cover, Banks CAI & Cat Back,
2015 JKUR, Anvil, 3.5" AEV, 35x12.5R17 Nitto Trail Grapplers, Bestop Trektop Pro, TruckLites, Poison Spyder Stubby, Smittybilt 12.5 XRC, Red Prolink, EVO rear bumper cover, Banks CAI & Cat Back,
JK Enthusiast
Joined: Jan 2015
Posts: 333
Likes: 0
From: Schererville, Indiana
Thread Starter
Former Vendor
Joined: Sep 2015
Posts: 109
Likes: 0
From: High Point, NC
Lights look pretty awesome but I have a few questions.
Do these need a anti flicker harness?
Do they have to be hard wired or is there a plug and play harness available? ( without the turn signal of course )
Why does the low beam turn off when the high beam is selected?
Would there be any issues with me adding a relay to keep the low beam on when the high beam is selected?
Do these need a anti flicker harness?
Do they have to be hard wired or is there a plug and play harness available? ( without the turn signal of course )
Why does the low beam turn off when the high beam is selected?
Would there be any issues with me adding a relay to keep the low beam on when the high beam is selected?
1) These come with anti-flicker harnesses included in the purchase price.
2) Headlight high/low beams are plug and play. There is a bit of additional wiring required to power the DRLs, but you do not have to tap or splice into the factory wiring. The turn signal functionality requires you to tap into the factory turn signal wires. Our installation kit includes everything you'll need (minus a bit of automotive wire) to complete the install of the headlights, DRL, and turn signals.
3) I'll try to confirm with the design team, but I believe this had something to do with the DOT compliance requirements.
4) I cannot say for certain whether that would cause issues or not, but I wouldn't recommend it. It was never tested to operate that way.
Thread Starter
Former Vendor
Joined: Sep 2015
Posts: 109
Likes: 0
From: High Point, NC
Emails have been sent out to the 10 contest winners, so check your email if you entered in the drawing! Everyone else who entered the contest but were not selected will still be getting an email with an exclusive promo code within the next week or so. Thanks to everyone who entered!
JK Newbie
Joined: May 2009
Posts: 46
Likes: 0
From: vancouver, BC
Just answered my own question lol. I'm gonna wait for the first forum member to get his hands on a set
2015 JKUR, Anvil, 3.5" AEV, 35x12.5R17 Nitto Trail Grapplers, Bestop Trektop Pro, TruckLites, Poison Spyder Stubby, Smittybilt 12.5 XRC, Red Prolink, EVO rear bumper cover, Banks CAI & Cat Back,
2015 JKUR, Anvil, 3.5" AEV, 35x12.5R17 Nitto Trail Grapplers, Bestop Trektop Pro, TruckLites, Poison Spyder Stubby, Smittybilt 12.5 XRC, Red Prolink, EVO rear bumper cover, Banks CAI & Cat Back,
JK Newbie
Joined: Oct 2015
Posts: 10
Likes: 0
Emails have been sent out to the 10 contest winners, so check your email if you entered in the drawing! Everyone else who entered the contest but were not selected will still be getting an email with an exclusive promo code within the next week or so. Thanks to everyone who entered!
