Help please
Thread Starter
JK Enthusiast
Joined: Dec 2009
Posts: 472
Likes: 2
From: nanaimo, bc, canada
Help please
Does any one know how to tighten the front e-brake cable that goes to handle? Mine doesn't get tight till the very top and doesn't hold very good at all, thanks
JK Enthusiast
Joined: Sep 2010
Posts: 280
Likes: 0
From: Waukesha, WI
I always thought that the e-brake only worked the back brakes.... Good luck.......
I think I see what your saying..... prolly get into the console somewheres if not underneath.. A lot of help I am
I think I see what your saying..... prolly get into the console somewheres if not underneath.. A lot of help I am
Last edited by glocksrfun; May 22, 2011 at 01:13 PM. Reason: Cause I didn't get it.
JK Enthusiast
Joined: Mar 2010
Posts: 463
Likes: 0
From: Toronto, ON
When the rear shoes (ebrake shoes) wear enough there's an adjuster that should take up the slack.
Either
A) your adjusters are seized
B) your e-brake shoes are worn down to the limit
You don't adjust anything at the handle afaik.
Either
A) your adjusters are seized
B) your e-brake shoes are worn down to the limit
You don't adjust anything at the handle afaik.
Thread Starter
JK Enthusiast
Joined: Dec 2009
Posts: 472
Likes: 2
From: nanaimo, bc, canada
Lol, yes it only locks the rear and under the jeep both cables go into the floor in seperate spots, I just don't want to pull my consol all apart to find there isn't an adjustment
JK Enthusiast
Joined: Mar 2010
Posts: 463
Likes: 0
From: Toronto, ON
Originally Posted by jeep_creep
Lol, yes it only locks the rear and under the jeep both cables go into the floor in seperate spots, I just don't want to pull my consol all apart to find there isn't an adjustment
JK Junkie
Joined: Jan 2011
Posts: 3,449
Likes: 2
From: Newport news, va
