So where have you been mounting the CB's?
#81
JK Junkie
Join Date: Apr 2008
Location: Albuquerque, NM
Posts: 2,265
Likes: 0
Received 0 Likes
on
0 Posts
Mine is here along w/ where I mounted my External CB....
https://www.jk-forum.com/forums/show...ternal+Speaker
https://www.jk-forum.com/forums/show...ternal+Speaker
#82
Here's mine mounted in front of the shifter
I did have to cut the mounting bracket down 1/2" so the shifter didn't rub on the radio. Also clearanced the rubber boot on the end of the coax so it would sit low enough to not be in front of the ESP and hazard buttons. A 90deg coax adapter would have done the trick ut I'm a cheap bastard.
I did have to cut the mounting bracket down 1/2" so the shifter didn't rub on the radio. Also clearanced the rubber boot on the end of the coax so it would sit low enough to not be in front of the ESP and hazard buttons. A 90deg coax adapter would have done the trick ut I'm a cheap bastard.
#84
JK Enthusiast
Join Date: Dec 2006
Location: Corona, CA
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
So, what's the story with the ground wire that looks to be attached to the antenna wire and grounded to the antenna mount? Is there a splice in the antenna wire or? How do I know if i need a ground wire like that?
BTW my antenna is mounted to the 3rd brake lite. CB is grounded to the body. SWR is between 1.2-1.6 or so on channels 1-40.
BTW my antenna is mounted to the 3rd brake lite. CB is grounded to the body. SWR is between 1.2-1.6 or so on channels 1-40.
Last edited by RedDavid; 10-24-2008 at 09:50 PM.
#88
JK Enthusiast
Join Date: Mar 2011
Location: Bristol, NH
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts