What was done to your JK this week?
JK Enthusiast
Joined: Apr 2016
Posts: 146
Likes: 2
From: Fort Smith, AR
I've seen that bumper on EBay for a pretty sharp price. Are you pleased with it? Any feedback?
I think it is a great looking bumper for sure.
Do the LEDs connect to the existing jeep fog light Wiring? And are the LEDs very bright?
I think it is a great looking bumper for sure.
Do the LEDs connect to the existing jeep fog light Wiring? And are the LEDs very bright?
JK Newbie
Joined: Jan 2016
Posts: 89
Likes: 1
From: Portland, OR
Put some 17" Method NV Race Rims with Nitto Terra Grappler G2 285 / 70 R17s to go with the Trektop Pro. Makes the old 2011 Rubi look new.
Attachment 659177
Attachment 659177
JK Freak
Joined: Apr 2013
Posts: 896
Likes: 5
From: Ventura, CA
Replaced the factory rear driveshaft that I dinged and tore the boot on during our Rubicon trip. The Adams 1310 couldn't be easier to install. The videos on their website were awesome aids. I recommend getting a cheap $20 puller set off of Ebay or from Harbor Tools as it make removing the factory flanges a breeze.
JK Freak
Joined: Apr 2009
Posts: 537
Likes: 2
From: Houston, Texas, United States
Over the past week I put on a 3.5 inch Rubicon Express coil lift with RE front lower control arms and rear adjustable upper control arms. The kit included an adjustable front trackbar. This weekend I put on AMP Terrain master 35x12.50xR17 tires. Phase 1 of the upgrades is now complete. Below are some photos before, lifted with stock tires on and then lifted with the 35 inch tires. <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659105"/> Before the lift <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659106"/> Front Coil and lower control arms installed <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659107"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659108"/> <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659109"/> 3.5 inch lift with stock tires <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659113"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659114"/> Tire comparison stock vs 35's <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659110"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659111"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659112"/> Amp Terrain Master 35x12.50xR17 tires up close <img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659115"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=659116"/> The finished product!
JK Newbie
Joined: Mar 2016
Posts: 18
Likes: 0
I love the way it looks! The LEDs don't connect to the factory harness, but I wanted them on a separate switch anyways! It came with a wiring harness that I connected and ran with a switch so I can turn them on whenever! They are bright, but not overbearing enough to never use. Eventually I'll put some pods and a light bar on!
JK Enthusiast
Joined: Jun 2014
Posts: 132
Likes: 0
From: Tumwater, Washington
Looks good. Just bought the same Hard Rock, same color. Did your Tire shop have any issue mounting 12" wide tire to 7" wide stock rim? Discount tire has gotten very cautious about this and will only follow manufactures recommendations for rim width. I don't know anything about those AMP tires.
JK Freak
Joined: Apr 2009
Posts: 537
Likes: 2
From: Houston, Texas, United States
Installed Maximus-3 centered winch plate with my Smittybilt XRC and their fog bracket with KC gravity Amber fogs. Nothing left to do now but save for tire carrier, lift and wheels/tires.
