Check the Status of your Jeep JK Wrangler - Order Status Codes
JK Enthusiast
Joined: Oct 2006
Posts: 386
Likes: 0
From: Bozeman, Montana
Good to see someone moving up in the queue.
JK Enthusiast
Joined: Oct 2006
Posts: 496
Likes: 0
From: Bryson City, NC
What a bummer. If you can believe it, I already have parts in hand or at least lined up to be installed and no JK to install them on.
So far I have the aluminum sill plates, a shiny 3D mag light and a roll-bar mount for it, a custom embroidered hat, Slush floor mats, 6 ton bottle jack with foldable lug wrench, 168 piece Craftsman Tool Kit, new Leatherman tool for the glovebox, 2 million candlepower spot light for under the seat, minimag for the glovebox, blanket from Bass Pro Shops, and a Model 31 Glock for under the driver's seat.Planning to order the Pioneer Z1 once finances allow, and a budget 3" lift from Full Traction.
Tom
Bryson City, NC
JK Jedi
Joined: Sep 2006
Posts: 5,567
Likes: 1
From: So. Cal.
JK Enthusiast
Joined: Oct 2006
Posts: 323
Likes: 0
From: La Verne, SoCal
Just updated today via email from my rep:
DECEMBER 2007MY - Period 2 allocations will go out on Tuesday, November 14th. Due to the Thanksgiving holiday and some IT maintenance, this will be the last allocation period in December.
December 2007MY - Period 2 will run from Tuesday, November 14th to December 1st. Balance Out will occur on November 29th.
DECEMBER 2007MY - Period 2 allocations will go out on Tuesday, November 14th. Due to the Thanksgiving holiday and some IT maintenance, this will be the last allocation period in December.
December 2007MY - Period 2 will run from Tuesday, November 14th to December 1st. Balance Out will occur on November 29th.
JK Junkie
Joined: Oct 2006
Posts: 2,466
Likes: 0
From: Pottstown, PA
Just updated today via email from my rep:
DECEMBER 2007MY - Period 2 allocations will go out on Tuesday, November 14th. Due to the Thanksgiving holiday and some IT maintenance, this will be the last allocation period in December.
December 2007MY - Period 2 will run from Tuesday, November 14th to December 1st. Balance Out will occur on November 29th.
DECEMBER 2007MY - Period 2 allocations will go out on Tuesday, November 14th. Due to the Thanksgiving holiday and some IT maintenance, this will be the last allocation period in December.
December 2007MY - Period 2 will run from Tuesday, November 14th to December 1st. Balance Out will occur on November 29th.
Just so I understand correctly, if I'm in BX currently, the next time I should check is Tues 11/14. If I don't go to D on Tues 11/14, I should check again on 11/29 at Dec period 2 balance out? After that, It's a January Build?
JK Enthusiast
Joined: Oct 2006
Posts: 386
Likes: 0
From: Bozeman, Montana
Broke down and called again this morning.
I was in BG for weeks, then went to BX last week, today I'm back in BG. :sad:
Damn this wait is brutal.
Beel
Ordered - 30 Sept. Rubicon Unlimited, Rescue Green, Dual tops, Towing package
P.S. I should add the dealership I went thru was upfront about the wait. They told me to expect at least a 10 to 12 week wait. I'm only at 6 weeks, so I'm not even close to the prediction yet. Of course they never return my calls or e-mails and they lied to me about the dealer allocation.
I was in BG for weeks, then went to BX last week, today I'm back in BG. :sad:
Damn this wait is brutal.
Beel
Ordered - 30 Sept. Rubicon Unlimited, Rescue Green, Dual tops, Towing package
P.S. I should add the dealership I went thru was upfront about the wait. They told me to expect at least a 10 to 12 week wait. I'm only at 6 weeks, so I'm not even close to the prediction yet. Of course they never return my calls or e-mails and they lied to me about the dealer allocation.
Last edited by Beel_MT; Nov 10, 2006 at 09:23 AM.
JK Enthusiast
Joined: Oct 2006
Posts: 323
Likes: 0
From: La Verne, SoCal
JK Super Freak
Joined: Oct 2006
Posts: 1,045
Likes: 0
From: Santa Clara, CA
Called DCX just now, still in BGL but the guy seemed happy because he saw an update to my record yesterday with the note "last ord edit" or "last org edit" (not sure what he was saying). He didn't have any idea what this meant, though.
Anyone know if this means anything? Anyone else been in BGL for more than a month? I really wish I could figure out what equipment they were waiting on so I could change my order not to include it
Anyone know if this means anything? Anyone else been in BGL for more than a month? I really wish I could figure out what equipment they were waiting on so I could change my order not to include it
JK Enthusiast
Joined: Oct 2006
Posts: 496
Likes: 0
From: Bryson City, NC
Join the club So far I have the aluminum sill plates, a shiny 3D mag light and a roll-bar mount for it, a custom embroidered hat, Slush floor mats, 6 ton bottle jack with foldable lug wrench, 168 piece Craftsman Tool Kit, new Leatherman tool for the glovebox, 2 million candlepower spot light for under the seat, minimag for the glovebox, blanket from Bass Pro Shops, and a Model 31 Glock for under the driver's seat.
Tom
Bryson City, NC
Tom
Bryson City, NC
Tom
Bryson City, NC