One of the annoyances I have when wheeling in the mud is the D-ring/Shackles clanking around. With this clanking, you will not be able to here any loose or broken part problems with your Jeep.

Well thanks to the BallCock Shank Washer, (LOL) I was able to prevent the D-Rings from clanking. Sorry for the bad camera pix...

You may need to file them down a bit, but they work and look great!

 

wow... that looks great... i just keep my tow strap up front and that prevents the clanking... nice mod!

 

Great minds... great minds...

I have nearly the same setup on mine, my stepfather was a plumber/pump repairman so i have stacks of old plumbing stuff, found some old rubber grommets that look very similar and have them on mine. (Only difference is i have my pins ziptied so they wont rotate out and go missing)

 

I used an old set of mountain bike handlebar grips and cut them to fit. They work perfect.

 

Great idea! Thanks. What d-rings did you find to fit the Mopar bumper?

 

The ARB 3/4 D-rings fit. You can get them from Quadratec http://www.quadratec.com/products/92144_301.htm.

One thing I notice when I got my Mopar bumpers was the D-ring holes weren’t properly cut. The Hole were imperfect. I used my dremel to grind a perfect 3/4 hole and repainted with Satin Black Rustoleum.

 

Yup, same here. Thanks for the info.

 

wost product name ever.

 

But available to ship from San Francisco without delay.

 

With these, do the D-rings still clank when you hit a bump? I have been using rubber washers I got from the plumbing dept. at a hardware store (about $0.40 each so $1.60 per shackle mount). It stops any side to side clanking but not the up/down clanking, which really only happens when I hit speed bumps.

But I'm curious to know if these stop all clanking.