JK-Forum.com - The top destination for Jeep JK and JL Wrangler news, rumors, and discussion

Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

help with axle seal replacement.

 
Old Feb 14, 2013 | 06:45 PM
Share
  #21  
ronjenx's Avatar
ronjenx
JK Jedi Master
15 Year Member
 
Joined: Feb 2008
Posts: 12,906
Likes: 185
From: Maine
Default
Originally Posted by blkpearl_jk
Thought that what it was... I can still thorough it back in that way right? Just won't have front lockers? So I need to find a used one with a good magnet and switch it out?
Yes to your questions.
I would cut the wires off so the block won't flop around and get caught on anything.
Reply
0
Old Feb 14, 2013 | 06:48 PM
Share
  #22  
blkpearl_jk's Avatar
blkpearl_jk
Thread Starter
JK Newbie
 
Joined: Feb 2013
Posts: 49
Likes: 0
From: oceanside,ca
Default
Originally Posted by ronjenx

That means you need a new locker, or the good magnet off a locker that was broken in some other way.
What could have caused this to break? Now that recall my front locker light has been blinking
Reply
0
Old Feb 14, 2013 | 07:00 PM
Share
  #23  
ronjenx's Avatar
ronjenx
JK Jedi Master
15 Year Member
 
Joined: Feb 2008
Posts: 12,906
Likes: 185
From: Maine
Default
What was the condition of the tab on the anti-rotation plate when you removed the cover?

Last edited by ronjenx; Feb 14, 2013 at 07:02 PM.
Reply
0
Old Feb 14, 2013 | 07:12 PM
Share
  #24  
blkpearl_jk's Avatar
blkpearl_jk
Thread Starter
JK Newbie
 
Joined: Feb 2013
Posts: 49
Likes: 0
From: oceanside,ca
Default
Originally Posted by ronjenx
What was the condition of the tab on the anti-rotation plate when you removed the cover?
It was bent back nit seated in like the ine in the picture. .
Reply
0
Old Feb 14, 2013 | 07:16 PM
Share
  #25  
ronjenx's Avatar
ronjenx
JK Jedi Master
15 Year Member
 
Joined: Feb 2008
Posts: 12,906
Likes: 185
From: Maine
Default
Originally Posted by blkpearl_jk
It was bent back nit seated in like the ine in the picture. .
That's the source of your breakage, then. The magnet was allowed to spin.
It usually just breaks off the wires, though.
Has your differential ever been apart in the past?
How about a pic of the plate?
Reply
0
Old Feb 14, 2013 | 07:23 PM
Share
  #26  
blkpearl_jk's Avatar
blkpearl_jk
Thread Starter
JK Newbie
 
Joined: Feb 2013
Posts: 49
Likes: 0
From: oceanside,ca
Default
The online time its been open was to change out the deff covers
Click image for larger version Name: ForumRunner_20130214_202234.jpg Views: 132 Size: 51.9 KB ID: 422387
Reply
0
Old Feb 14, 2013 | 07:38 PM
Share
  #27  
ronjenx's Avatar
ronjenx
JK Jedi Master
15 Year Member
 
Joined: Feb 2008
Posts: 12,906
Likes: 185
From: Maine
Default
Originally Posted by blkpearl_jk
The online time its been open was to change out the deff covers
Attachment 422387
The tab definately didn't keep the magnet from rotating. I've seen this a few times before, but why the magnet rotates with enough torque to displace the tab is a mystery.
Reply
0
Old Feb 14, 2013 | 08:24 PM
Share
  #28  
blkpearl_jk's Avatar
blkpearl_jk
Thread Starter
JK Newbie
 
Joined: Feb 2013
Posts: 49
Likes: 0
From: oceanside,ca
Default
Ok now my axle shafts don't wabt to sit on the way in..?
Reply
0
Tags
Back to Subforum
Modified JK Tech
View Next Unread
Anyone running 38's


Thread Tools

Advanced Search

All times are GMT -8. The time now is 06:35 AM.