Marker light mod

Reply Subscribe

Thread Tools

Dec 10, 2007 | 06:35 AM

#31

jkinva

JK Enthusiast

Joined: Mar 2007

Posts: 204

Likes: 0

From: Virginia

Quote:

Originally Posted by dsy

Credit for this mod goes to Daniel Stern. I just followed his instructions and passed it along.

Maybe so dsy, but your's was in English. I printed out the Stern sheet a LONG time ago, but had a tough time figuring it out. I could be an idiot, but I got it done with your help. Thanks to both of you.

Dec 10, 2007 | 08:46 PM

#32

Jamooche

JK Enthusiast

Joined: Oct 2007

Posts: 261

Likes: 0

From: Western MA

Since I disabled my horn beep on lock, I love how I can now see the marker lights flash on lock from the side of the truck as I walk away.

Dec 11, 2007 | 05:51 AM

#33

jkinva

JK Enthusiast

Joined: Mar 2007

Posts: 204

Likes: 0

From: Virginia

Quote:

Originally Posted by Jamooche

Since I disabled my horn beep on lock, I love how I can now see the marker lights flash on lock from the side of the truck as I walk away.

X 2!!!

Jan 5, 2008 | 07:24 PM

#34

seal20

Thread Starter

JK Freak

Joined: Aug 2007

Posts: 665

Likes: 0

From: (714)

Quote:

Originally Posted by Grant211

Is more wire needed? if so what guage and how long?
So what is the best way to connect the two wires? Quick Connect, solder, old school twist and wire nut, shrink

I'm a newbie to this and what it done right. Sorry for the lame questions

More wire is not needed. A wire tap works best it connects the cut wire to the wire you are conncting to without cutting both. Home Depot, Lowes , Ace or any auto parts store will have them just ask.

Jan 5, 2008 | 07:35 PM

#35

Jamooche

JK Enthusiast

Joined: Oct 2007

Posts: 261

Likes: 0

From: Western MA

I used more wire, about 7 inches, of 16 gauge. I did this so that I could run the wires totally within the existing black plastic wiring sheath. I used this with a quick splice connector with the flip top cover.