Poison Spyder Brawler Lite Front Bumpers
JK Enthusiast
Joined: Jan 2012
Posts: 343
Likes: 0
From: Hahira, Georgia
Originally Posted by crazymike
Why do you guys prefer the recessed winch? I just mounted my winch on this bumper but so far no issues with heat/airflow.
You lose some structural integrity with recessing your winch.
We hit 90s this week and no issues on highway commute.
You lose some structural integrity with recessing your winch.
We hit 90s this week and no issues on highway commute.
JK Enthusiast
Joined: May 2011
Posts: 135
Likes: 0
From: Toronto, Ontario
Originally Posted by clemons
Much cleaner look with a lot more protection for the winch. Improved air flow to radiator/trans cooler (if you have one). Not everyone wants to show off their 1400$ warn, your winch and line is more exposed to sun damage and will fade.
JK Enthusiast
Joined: Jan 2012
Posts: 343
Likes: 0
From: Hahira, Georgia
Originally Posted by crazymike
I use a $350 runvA winch. The only thing I'm showing off is my thriftiness. And I use a neoprene cover...
JK Enthusiast
Joined: Mar 2012
Posts: 194
Likes: 0
From: Sparta, NJ
[QUOTE="DTS"]
We do have a couple more variations coming out soon, including a version with a Trail Stinger, and a version with a Trail Stinger and Grille Hoop. We've built our first prototype of the version with Trail Stinger and Grille Hoop, I've included a photo of it below. We're going to make a couple of small adjustments to it before it goes into production though, specifically narrowing-up the stinger at the bottom, where it attaches to the bumper, it will attach at the same points as the current Brawler Bar. The version without the Grille Hoop will have some plate steel gussets, similar to what we have with the Brawler Bar but probably come a little higher up the tube. We will post up photos of the second article or production version when its ready.
Is this bumper with the grille hoop available yet?
We do have a couple more variations coming out soon, including a version with a Trail Stinger, and a version with a Trail Stinger and Grille Hoop. We've built our first prototype of the version with Trail Stinger and Grille Hoop, I've included a photo of it below. We're going to make a couple of small adjustments to it before it goes into production though, specifically narrowing-up the stinger at the bottom, where it attaches to the bumper, it will attach at the same points as the current Brawler Bar. The version without the Grille Hoop will have some plate steel gussets, similar to what we have with the Brawler Bar but probably come a little higher up the tube. We will post up photos of the second article or production version when its ready.
Is this bumper with the grille hoop available yet?
Former Member
Joined: Nov 2008
Posts: 40
Likes: 0
From: Banning, CA
[QUOTE=kalopoulos;3085284]
We do have a couple more variations coming out soon, including a version with a Trail Stinger, and a version with a Trail Stinger and Grille Hoop. We've built our first prototype of the version with Trail Stinger and Grille Hoop, I've included a photo of it below. We're going to make a couple of small adjustments to it before it goes into production though, specifically narrowing-up the stinger at the bottom, where it attaches to the bumper, it will attach at the same points as the current Brawler Bar. The version without the Grille Hoop will have some plate steel gussets, similar to what we have with the Brawler Bar but probably come a little higher up the tube. We will post up photos of the second article or production version when its ready.
Is this bumper with the grille hoop available yet?
There didn't seem to be much demand, so it was tabled for a while. If there is enough intrest it can be brought back to the top of the list.
Thanks,
Originally Posted by DTS
We do have a couple more variations coming out soon, including a version with a Trail Stinger, and a version with a Trail Stinger and Grille Hoop. We've built our first prototype of the version with Trail Stinger and Grille Hoop, I've included a photo of it below. We're going to make a couple of small adjustments to it before it goes into production though, specifically narrowing-up the stinger at the bottom, where it attaches to the bumper, it will attach at the same points as the current Brawler Bar. The version without the Grille Hoop will have some plate steel gussets, similar to what we have with the Brawler Bar but probably come a little higher up the tube. We will post up photos of the second article or production version when its ready.
Is this bumper with the grille hoop available yet?
Thanks,
Thread Starter
Former Member
Joined: Jul 2010
Posts: 776
Likes: 0
From: Mentone, CA
Our first shots of a Brawler Lite with Trail Stinger finished and mounted up. This one's on the Spike's Tactical JK, which is just about finished and we'll have more photos of it soon.
JK Super Freak
Joined: Jun 2011
Posts: 1,206
Likes: 0
From: Elizabethtown, PA
Originally Posted by DTS
Our first shots of a Brawler Lite with Trail Stinger finished and mounted up. This one's on the Spike's Tactical JK, which is just about finished and we'll have more photos of it soon.
JK Jedi
Joined: May 2011
Posts: 4,343
Likes: 1
From: Wake Forest, NC
JK Freak
Joined: Sep 2011
Posts: 944
Likes: 1
From: Peoria, Illinois
Originally Posted by DTS
Our first shots of a Brawler Lite with Trail Stinger finished and mounted up. This one's on the Spike's Tactical JK, which is just about finished and we'll have more photos of it soon.
