View Poll Results: Should i paint the Xenon flares?
Painted black body matched
65
51.18%
leave them plastic
62
48.82%
Voters: 127. You may not vote on this poll
Project: JK (re)build Final touches
Thread Starter
JK Newbie
Joined: Jun 2009
Posts: 83
Likes: 0
From: "Sixburgh", PA!!
just got your PM ... so get this everyone ... out of stock and backordered till 9/21!!!!
also got to messin with my OBD II port. i for sure do not have a 12v source at the plug, but i apear to have all the rest OK. is there ANY where else to find fuses besides the box right next to the battery???? can anyone tell me the exact location of the fuse that powers the port???? all my fuses in the box next to the batt tested fine ...
also got to messin with my OBD II port. i for sure do not have a 12v source at the plug, but i apear to have all the rest OK. is there ANY where else to find fuses besides the box right next to the battery???? can anyone tell me the exact location of the fuse that powers the port???? all my fuses in the box next to the batt tested fine ...
Last edited by 6DoF; Jul 28, 2009 at 03:42 AM.
Thread Starter
JK Newbie
Joined: Jun 2009
Posts: 83
Likes: 0
From: "Sixburgh", PA!!
Thread Starter
JK Newbie
Joined: Jun 2009
Posts: 83
Likes: 0
From: "Sixburgh", PA!!
check these:
"Cheep Blue" - paid $300, sold $200 in parts off that i didn't need, put $200 into fixing it (freed the seased motor, new t-case, new joints, ext), wheeled the ever livin PISS out of it, sold the whole thing for $300.
Cheep-V2 "Skunked" - paid $200, put a $40 junkyard lift on (f-150 coils, dakota leaves), wheeled the ever livin PISS out of it, sold the whole thing for $400.
Cheep-V3 - Free from my cuz who i just fixed the white YJ for, but cost $200 to pick up with my trailer in downtown phily suburbs (upper darby) and get home (my trailer was 4" from not fitting down his road between parked cars), $200 in parts, daily drove it for 2 months, sold for $2000 to fund the JK
(more pics later once i get home and can access photobucket)
Last edited by 6DoF; Jul 28, 2009 at 06:36 AM.
Thread Starter
JK Newbie
Joined: Jun 2009
Posts: 83
Likes: 0
From: "Sixburgh", PA!!
Thread Starter
JK Newbie
Joined: Jun 2009
Posts: 83
Likes: 0
From: "Sixburgh", PA!!
not only does that tell me what fuse to check and trace, but it also says the 12v lead is not run by the computer so putting in my own 12v lead would be an identical option.
WOOT!! i bet i get that little POS workin tonight ... if i don't fall asleep first!
JK Enthusiast
Joined: Nov 2008
Posts: 473
Likes: 0
From: Farmington, MI
YOU ARE THE MAN!!!!
not only does that tell me what fuse to check and trace, but it also says the 12v lead is not run by the computer so putting in my own 12v lead would be an identical option.
WOOT!! i bet i get that little POS workin tonight ... if i don't fall asleep first!
not only does that tell me what fuse to check and trace, but it also says the 12v lead is not run by the computer so putting in my own 12v lead would be an identical option.
WOOT!! i bet i get that little POS workin tonight ... if i don't fall asleep first!
